DFAC 6 Wheeler Water Cleaning Vacuum Cleaner

• Type: Hand Propelled
• Certification: ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
• Transmission Type: Manual
• Emission Standard: Euro 4
• Fuel: Diesel
• Payload: 20T
• Model NO.: dfac-6wheeler
• Use: Burnishing
• Cleaning Process: Cold Water Cleaning
• Condition: New
• Transport Package: Nude or as Customer Request
• Specification: 5780*2010*2450mm
• Trademark: Dongfeng DFAC
• Origin: China
• HS Code: 8705909090
• Production Capacity: 500PCS/Week

Product Description

Dongfeng DFAC 6 Wheeler Water Cleaning Vacuum Cleaner


Sweeper Truck is an efficient environmental sanitation truck equipped with functions of sweeping road and high pressure cleaning road. It is widely used in city streets, road, station, square etc. Road cleaning truck are mainly composed of chassis, box (garbage box and water tank), sweep system, auxiliary engine, fan system, cleaning system, suction system, dust system, hydraulic system and electrical control system. The garbage box and water tank are made of super thick stainless steel plate. In order to prevent the early damage of the water tank and the garbage box because of corrosion, all the parts of the tank and the garbage box are made of super thick stainless steel, which greatly prolongs the service life of the whole truck.

A large area filter net is set at the top of the box to to reduce the clogging and to ensure the fluency of suction, the top of the box is set with a flow guide slot, which improves the dust effect, makes the garbage accumulation even and improves the effective capacity. Road sweeper truck is equipped with 2 brushes, the cleaning device has the function of automatic barrier protection or automatic reset. Road cleaning truck uses a unique hand pressure pump emergency lifting system: when the auxiliary engine fails and can not start the auxiliary engine, the garbage box is raised to facilitate the maintenance of the worker. The hydraulic valve group adopts the famous leading brands: the test pressure can reach 35MPa and the flow rate is 300L/Min. The dynamic, static and fatigue life of various industrial hydraulic valves and walking mechanical hydraulic valves can be accurately tested.

Using ultra wide mouthpiece, inside have long row of high pressure water spray bar is near the ground, have a big water impact force, can be direct make the sewage to suction port, efficient.


Technical date 
 

Vehicle performance and parameters
Item		Parameter	Unit
Working Performance	Max sweep width	3.5	m
	Low pressure flushing width	24	m
	Sweep speed	3-20	km/h
	Max sweep capacity	70000	m2/h
	Max inhalation of granularity	≥110	mm
	Angle of unloading	≥48	.
	Volume of water tank	5000	L
	Volume of garbage tank	5000	L
Driving Performance	Max speed	98	km/h
	Max gradeability	30	%
	Braking distance	≤10	m
	Min turning diameter	≤13.6	m
Fuel Performance	Fuel consumption(Driving)	≤12	L/100km
	Fuel consumption(Sweep working at 8km/h)	6.5	L/h
		2.7	L/10000m2
Quality Parameters	Curb weight	7045	kg
	Rated capacity	4255	kg
	GVW	10000	kg
Dimension Parameter	Overall dimensions	6900*2200*2700	mm
	Wheelbase	3800	mm
	Track front	1770	mm
	Track rear	1586	mm
	Front suspension	1250	mm
	Rear suspension	1690	mm
	Approach angle	24	.
	Departure angle	16	.

 

Main parts and parameters
Chassis	Chassis model	EQ1070
	Engine model	CY4102
	Engine power	120hp
	Clutch system	single disc, dry type, diaphragm spring clutch
	Gearbox	5speed +1reverse
	Driving axle	4T/7T
	Cabin	Dongfeng single row, with A/C
	Tire	8.50-16
Vice-fan Engine	Brand	JMC
	Rated power	64 kw/87hp
	Fuel type	Diesel, share with chassis fuel tank
Draught Fan	Type	high pressure centrifugal specialized draught fan
	Rated speed	2600-2900r/min
	Actuator type	Driveby vice-fan engine through transmission shaft, automatic clutch, narrow V type belt transmission
Hydraulic System	Type	open type and electrohydraulic control system
	Main part	gear pump, cycloid motor, hydrocylinder, magnetic valve, hydraulic hand pump
	Hydraulic relief pressure	15Mpa
	Hydraulic oil tank	60L
Spray Watering	Main part	electric water pump, water filtration system, spray nozzle, water tank
Electric System	Composition	Madeof chassis electric system and vice-fan engine with other work operating system
	Systemvoltage	12V
	Battery model	12-80A.H
High pressure flushing system	High pressure pump	Germany plunger pump
	Rated pressure	20MPa
	Working pressure	10Mpa
	Rated flow	106L/min
	Rated speed	1000r/min
	Control type	Cylinder driving electric control
Low pressure flushing system	Low pressure pump	80QZB60/90
	Rated flow	1000L/min
	Head of delivery	90m
	Flushing width	24m
Sweeping Device	Type	Two sweeping devices between two axle in the middle, symmetric distribution on both side, drive by hydraulic motor, three speed level control, independent control
	Diameter	f900m
	Rotate speed	Three level :110r/min 80r/min  60r/min
	Dip angle	Forerake 4o-6o  ,Out incline 2o-4o
Suction Nozzle	Type	U-shaped, Free to move
	Diameter	f200mm
	Ground clearance in working	5-10mm
Accessories	LED arrows lamp S chneider Control switch Draught fan(maintenance-free) Manual pump emergency system Anti-overflow alarm device on water and dust tank Low level alarm device on water and dust tank Working and parking monitor in cabin

Chassis brand :

CNHTC , Beiben trucks , Shacman trucks , FAW trucks , I SUZU ,Hongyan trucks,FOTON trucks , Dongfeng trucks , JAC trucks

Truck picture:







Application:
The Vacuum Sweeper Truck is mainly used for road dust cleaning and suction. It is widely used in seaports, coal mining places, urban roads, highways, airports, docks, Bridges, squares, residential areas etc to make the places.
A Road Suction Truck can largely save labor cost and working time. To use the Sweeper Truck one hour can match a person sweeping the road all day!


Details :
1. With auxiliary engine. It is with JMC 64KW vice engine and supply enough power for the suction devices. The vice engine is connected to the fan adopts automatic centrifugal clutch, can guarantee the vice engine no-load start.
2. Vacuum device and suction nozzle arrangement adopts "wide of suction nozzle by the main suction + left and right side suction nozzle structure arrangement. The suction cup device has the function of avoiding and resetting automatically when encountering obstacles.This function can effectively solve the problem of easily damaged dust collector. Full floating suction nozzle, with the characteristics of large vacuum width, high vacuum efficiency, and conducive to the adjustment and maintenance of suction nozzle.
3. The liner of dustbin adopts double structure, the inner layer is all stainless steel;The high efficiency filtration of 4 sets of polymer filter cylinders can effectively reduce the secondary pollution caused by dust.
4. The front part of the truck is equipped with an automatic emergency system of hand pump.The tail is equipped with an optional water spray dust removal device;Open and close the garbage box door and garbage dump can be operated in the driving room, which is safe, convenient and reliable.
5. The filter cylinder of the vacuum truck can effectively separate the dust absorbed by the vacuum truck so as to avoid secondary dust pollution. There are two cleaning methods for the filter cylinder of the vacuum truck, one is equipped with automatic pulsed dust cleaning, and the other is disassembled and cleaning. Both are easy to operate