Product Description
Sinotruck howo 6*4 10 tyre 8cbm Slurry Seal Coat Truck For Sales
Our company is appointed by the Ministry of Industry and Information of China which is a manufacturer for producing all kinds of special trucks, and the slurry seal coat truck is one of our trucks. It is one of the most successful road-resurfacing methods, designed to extend the life of a road's driving surface. The chip seal process involves applying a layer of asphalt emulsion and aggregate rock over the road. The process consists of liquid asphalt, immediately followed by rock chips.
1. Full computer control in driving cab, only needs one operator.
2. Each nozzle is separately managed and independently controlled.
3. Italy Riello burner indirect heating by heat transfer oil.
4. High Viscosity asphalt pump for all kinds of modified asphalt and emulsified asphalt.
5. The vehicle can be widely used in synchronous seal operation of each grade of highway. It is cost-saving, wear-resisting, anti-skidding and waterproof.
6. After construction traffic can be quickly restored. It is suitable for waterproof of road surface and bridge deck, crushed stone seal technology of the lower seal coat and pavement maintenance and repairing.
7. Chip Sealer can perform asphalt binder spraying and chip spreading processes synchronously, which allows full contact between binders and aggregates, thus resulting in maximum cohesive performance. It can also separately spray or spread asphalt or aggregate in special conditions.
8. It can perform asphalt binder spraying and chip spreading processes synchronously, which allows full contact between binders and aggregates, thus resulting in maximum cohesive performance. It can also separately spray or spread asphalt or aggregate in special conditions.
| Truck Specification |
| Chassis model |
ZZ1257N4341W |
| Cab |
HOWO single row cab, with power steering. Electronic flameout,without a/c |
| Driving Type |
6*2 Left hand driving |
| Max Speed (km/h) |
95 |
| Overall dimension(mm) |
10200*2500*3730 |
| GVW( kg) |
25000 |
| Mass in working order ( kg) |
17370 |
| Tank Capacity (L) |
8000 |
| Wheelbase(mm) |
4325+1350 |
| F/R track base (mm) |
2022, 2041, 1830/1830 |
| F/R overhang (mm) |
1500/1945, 1920 |
| Approach/Departure Angel |
16/23 |
| Tire |
12.00R22.5 |
| Clutch |
Single-plate dry diaphragm spring clutch |
| Steering |
Hydraulic steering with power assistance |
| Bridge |
Front axle |
Hf9 |
| Rear axle |
Hc16 |
| Engine |
Model |
WD615.69 |
| Fuel Type |
Diesel fuel |
| Type |
Water-cooled four-stroke,, direct injection, turbocharged |
| Exhaust(ml) |
9726 |
| Max output power/rotate speed (hp /rpm ) |
336 |
| Braking system |
Service Brake |
Air over hydraulic dual circuit system |
| Park Brake |
Mechanical, internal expanding acting on transfer |
| Eletric system |
24v |
| Upper-Body specification |
| Asphalt pump discharge(L/min) |
950 |
| distribution width measurement(mm) |
4000 |
| Distribution height from ground level(mm) |
200~450 |
| Distribution quantitative(L/m2) |
0.2-3.5 |
| Burner |
G20 (from Italy) |
| Asphalt pump |
QGB950 |
| Asphalt pump hydraulic drive motor |
05-130-bd31 |
| Hydraulic pump |
50-20-16 |
| Control method |
Automatic controlled one by one |
| Heating Model |
Thermal fuelAutomatic heating |
| Conducting oil pump |
40-25-160 |
Truck Picture:
Application:
Asphalt distribution truck is widely used in highway construction and highway maintenance engineering. It can be used for the different pavements of upper and lower sealing layer, prime coat, waterproof layer, adhesive layer, asphalt surface treatment, bituminous penetration pavement, and fog sealing layer and other construction. It also can be used for transportation of liquid asphalt or other heavy oils.
Details :
Audited Supplier 
){kind=link}