100p 2 Ton Foam Fire Truck

• Customization: Available
• Type: Foam
• Certification: ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
• Emission Standard: Euroiii, IV, V,VI
• Transmission Type: Manual
• Payload: 2000L
• Fuel: Diesel
• Drive Wheel: 4×2
• Horsepower: ＜150hp
• Condition: New
• Transport Package: Nude
• Specification: 5490× 1960× 2940(mm)
• Origin: China
• HS Code: 8503009090
• Production Capacity: 500PCS/Week

Product Description

100p 2 ton Foam fire truck is Modified by Qingling QL1040BUFWY chassis. The vehicle is composed of two parts: the firefighter's cabin and the body. The cabin is the original double row, which can take 2+3 people. The car has a built-in tank structure. The front of the body is a water tank + equipment box, and the rear is a pump room.

The carrier tank is made of high-quality carbon steel, which is elastically connected to the chassis. It carries 450kg of water and 200kg of foam (maximum volume can be 1700kg). It is equipped with a CB10/30-XZ fire pump produced by Shanghai Fire Equipment Co., Ltd., rated Flow 30L/S.

Product Specifications:

 

Vehicle	Vehicle name		100p Brand 2 ton Foam Fire Truck
	Dimensions		5490×1960×2940(mm)
	Total quality		4360kg
	Curb quality		3335kg
	Load quality		650kg
	Number of passengers		2+3 people (double row)
	Approach/departure angle		24/16 (°)
	Minimum turning radius		≤6m
Chassis	Brand		100P
	Chassis model		QL1040BUFWY
	Cab		Double row
	Wheelbase		2765mm
	engine		120 hp of
	Emission Standards		Eruo IV
	power		88kw
	Displacement		2999ml
	Torque		290N.m
	Gearbox		MSG fifth gear
	Tire		7.00R16
	air conditioning
	other		Directional boost, functional LCD instrument panel, dual-circuit oil brake
Special function	Liquid tank	Carrier volume	Jug	Foam tank
			450kg (actual 1 party)	200kg (actual 0.5 square)
		Material	Carbon steel ( stainless steel or PP material can be selected as required )
		Tank fixing	Flexible connection with chassis frame
		Manhole	2 DN460 manholes with quick lock/open device
		Water inlet	There is a DN65 interface on the left and right sides of the water tank
		Inlet and outlet	1 water tank to water pump inlet pipe, DN100 valve, manual control 1 foam tank to water pump inlet pipe, DN40 valve, manual control 1 water pump to water tank filling pipe, DN65 valve, manual control
		Drain	2 DN40 water tanks to put the remaining water port, with manual control of the ball valve
		Overflow	2 DN65 overflow ports
	Fire Pump	model	CB10/30-XZ low-pressure vehicle fire pump
		form	Atmospheric centrifugal
		Installation location	Rear
		flow	30L/s @1.0MPa
		Outlet pressure	1.0MPa
		Maximum suction depth	7m
		Water diversion device	Built-in sliding vane pump
		Diversion time	Maximum suction depth≤35s
	Fire cannon	model	PL24
		flow	24L/s
		Rotation angle	360° horizontal rotation
		Range	Water≥45m		Water and foam≥40m
		Maximum elevation/depression angle	Elevation angle ≥+45°		Depression angle≤-15°
	Power take-off and transmission system	structure type	Sandwich mechanical transmission
		Clutch method	Hand control
		Lubrication method	Splash lubrication
		Transmission system	Cross shaft universal joint drive shaft
	Pipeline system	Pipe material	High-quality seamless steel pipe
		Suction pipe	There is a DN100 suction port on the back side of the pump room
		Water injection line	There is a DN65 water injection port on the left and right sides of the water tank, and a DN65 water pump is installed in the pump room to inject water into the tank
		Outlet pipe	There is a DN8I0 water outlet on the left and right sides of the pump room, with a shut-off valve and a cover
		Cooling water pipeline	Cooling water pipeline and control valve with cooling power take-off
	Electrical Equipment	Fireplace lighting	1 35W fire searchlight installed at the rear
		Strobe light	Install red and blue strobe lights on both sides of the body
		Warning device	Install a long row of red warning lights on the top of the cab
		Siren	The control box is in front of and below the driver in the cab
		Auxiliary lighting	Firemen's room, pump room and equipment box are equipped with lights, and the control dashboard is equipped with bright and indicator lights
		Additional electrical	Set up an independent circuit
	Ladder and handle	Ladder	Aluminum alloy two-section flip ladder, when used, it should not exceed 450mm from the ground,
		Get on the car	Using anti-slip round steel pipe with groove on the surface
	Equipment box and pump room	structure	The main frame structure is welded with high-quality square tubes, and the outer decorative plate is welded with carbon steel plates. The roof is non-slip and can walk.
		Equipment box	The equipment box is located at the rear of the passenger compartment. The aluminum alloy rolling doors on both sides are equipped with lighting lamps. The equipment room is equipped with storage boxes according to needs.
		Pump room	The pump room is located at the rear of the vehicle, with aluminum alloy rolling doors on both sides and the back, with lights inside, and some common equipment can be placed on both sides of the pump room
*Note: This parameter is standard for the manufacturer and can be customized according to customer needs.

FAQ 3: How about the after sale service?
        A: First we choose the popular brand in local market with after sale service. Second, we can delivery spare parts 
            and engineers to your place. Make maintenance plan and provide commissioning service.
FAQ 4: How about gurantee and warranty?
        A: We provide 16 years spare parts service for exporting vehicles, warranty one year from B/L date.
            Warranty of special model vehicle will be negotiated.